Furniture Backpack

A lot of customers and service providers ask what are the average prices for floor stripping and waxing services. Nationally prices average between 30 to 60 cents per sq.ft.

But in order to estimate the price a lot of additional factors have to be considered:

1) Size of the job. Usually, the bigger the job, the smaller is the price per sq ft. If you need a cleaning company so strip/wax the floor in the large building, you can expect lower prices per sq. ft. However if you are looking to strip and wax relatively small area, the prices are usually higher. Also cleaning companies have minimum prices which are in the range of $ 150 – $ 200. So even if you need to have a floor cleaned only in one small restroom, you may be charged $ 150 – $ 200 for that. Make sure to find out what is the minimum charge before hiring commercial cleaning company.

2) Travel distance. It’s preferred to hire local companies if you want to save on stripping/waxing services. The companies that are further away may count the travel time and fuel expenses into the final price.

3) Preparation time. Preparation for the job takes a lot of time and when estimating the price cleaning companies consider how much time they need in order to prepare for the job. If the floor that needs to be cleaned is on the first floor it takes less time to bring the equipment there than bringing the equipment to the 10th or 15th floor. Also if the cleaners have to strip/wax the hallway that has carpet on the sides, they need to tape off the carpeted area to make sure that no solution ends up on the carpet. This requires additional time and brings the price of floor cleaning services up.

4) Stripping and waxing or scrubbing and recoating? You may receive a lower price from a cleaning contractor, but is he actually going to strip the floor or scrub it? There a big difference between these too. When stripping you take all the wax off from the floor to the bare floor and then you have to apply 4-5 coats of wax to it. When scrubbing, you remove only the top 1-2 coats of wax from the floor and apply 1-2 coats of floor finish to the floor. Stripping and waxing usually takes at least twice as much time as scrubbing and recoating, so when you receive a much lower price make sure to find out if this price is for stripping/waxing or just scrubbing and recoating.

5) Moving furniture. If the cleaning company has to move the furniture (tables, chairs, mats etc) before/after the job, the price is usually higher up to 20 %. So in order to save money, do all the moving inhouse.

6) Wax buildup. When there is a lot of old wax on the floor cleaners may have to strip it a few times, therefore additional products and labor have to be used.

7) Stripping and waxing baseboards. Do you want a cleaning company to strip and wax baseboards? If yes, you should know that it is a very time consuming job to do and it’s also reflected in the price which becomes higher.

8) Edge work. The more edges in the room, the more time the cleaning company has to spend using doodlebugs and scrapers in order to remove wax edges and corners and prices go up.

9) Number of finish coats. The more coats are put on the floor, the higher the price.

10) Type of floor. Is the floor new or old? It’s usually easy to strip the new floor therefore the prices are lower for stripping new floor. Older floor may have been neglected or may have a lot of wax buildup on it and stripping it will require additional time. The price for stripping older floor may be higher.

11) Staining of the floor. If there are a lot of stains on the floor like rust, pain or if there are a lot of deep scratches or gum additional time is needed to scrape them off with scrapers. Additional detail cleaning will bring the price up.

12) Fixtures to work around. If there are a lot of fixtures that are staying in the room (refrigerators, furniture, equipment) during stripping/waxing, cleaning company will have to spend additional time working around them or moving them and the price may be higher.

13) Type of products used during stripping/waxing. Some cleaning companies may charge you less for floor stripping/waxing services, but it may be only because they use cheap products. But cheap products have a lot of downsides, cheap floor finishes tend to become yellow and wear off much faster. Another company may charge you a little more, but they may be using better products that maintain the appearance of your floor and last longer. So for example, you can pay one company $ 500 for the job, but because of their cheap products you will have to re-wax in 4 months. Another company may charge you $ 550, but because of good products you may not have to re-wax for 6 month instead of 4. Using the second company will be more cost efficient for you in the long run. Always find out what floor finishes are used for the job. Hillyard and Johnson floor finishes are the best floor finishes on the market these days.

14) Location of janitor closet. During the stripping/waxing job cleaning companies need to travel from their working area to the janitor closet very often in order to get water, empty wet vacuum etc. Where is the janitor closet located? If it’s far from the working area cleaners will spend a lot of time just moving back and forth and the prices may be higher.

15) Number of electric outlets in the floor. If there are a lot of electric outlets in the floor cleaners will need to tape them so the stripping solution/water doesn’t get there. It requires additional time and brings the prices up.

16) One time cleaning or service contract. If you are using the cleaning company for just a one-time job, you may expect higher prices. However, if you have a maintenance contract (like buffing the floor once per month of scrubbing/recoating services once a quarter) with a cleaning company you can ask for a discount. Also you can expect a discount if you are using a company that already provides commercial cleaning services to your building (example – regular janitorial services 3/5 days per week).

Whether you are living alone or with your family, furniture is most important part of your house as you spend time with your family, friends, and loved ones. In order to treat all well and comfortable it is essential to choose furniture which is more pleasing, attractive and welcoming in appearance. In fact you would be overwhelmed to see something which is perfect in all sense, holding up against all wear and tear of daily life in a way that it ideally makes it a place of your needs.

There is no doubt about the fact that designing a home is a tedious task. But little efforts at the start can rescue you from the long term pain. Choose furniture which rightly fits in different rooms of your home. Well if you are really bothered and finds its really dreadful, thinking about your poor interior designing skills then relax. As you dont have to design the furniture by yourself, instead something more enticing and pleasing which is already in place and adds beauty to your living room, bed room, kitchen and every corner of your house, making it more appealing and beautiful.

Many times customers go confused about the type of the furniture or the ways in which furniture can be selected. But not anymore, selecting and buying furniture goes easier with online store furniture which ensure array of designs to customers across the states and continents. Those who are willing to settle for traditional designs, online store is probably not for you. It is platform for those who love creativity and luxury and have strong inclination towards decking up their home interiors.

For those who are thinking of how to select a furniture for your bedroom or any other room just read on below and fetch some best tips:-

If you are looking for bedroom furniture, measure the area where you want to place the furniture. You can do it using an inch tape.

Mention the length and breadth of furniture. Make sure when you do it, you leave ample space around the furniture for movement.

Go online, visit to the bedroom furniture sale online and check for the specification which you have ideally considered.

Once you have checked for the type of the property, find different colors and designs which match with theme of your room.

Make sure you select something more unique and classic that is durable and augments the appearance.

If you are looking for some credible furniture store then get in touch with us and find best and unique collection. For more details visit .

If you want to own a unique gazebo with old-fashioned refinement, you might want to check out a wrought iron gazebo. Wrought iron has a beautiful antique look that can add sophistication and elegance to any garden, lawn or yard.

Wrought iron outdoor furniture has been a perennial favorite for its hard-wearing weather resistance and old world charm. A wrought iron gazebo has the same timeless appeal and durable strength. Yet many people are leery of buying wrought iron outdoor furnishings because it tends to rust on the surface. These days many wrought iron outdoor furnishings are treated with anti-rust coatings during manufacture, then are finished with powdered pigment coatings. Care should be taken not to scratch or damage the finish as the bare metal will likely rust once exposed to the elements. Occasional cleaning with mild soap and water will serve to keep the finish strong and new-looking. The manufacturer may also include care instructions with the wrought iron gazebo that should be carefully followed.

Wrought iron gazebos are usually shipped in pieces. They can be easily assembled and erected following the manufacturers instructions. You may want to enlist the help of a friend or two, to speed the job along. You can find wrought iron gazebos in many different shapes and styles to satisfy your desires. You might decide to buy wrought iron furniture to coordinate with your new gazebo and enjoy the soon-to-be heirloom set while dining outdoors with the family or socializing with friends.

You will love how a wrought iron gazebo adds beauty and distinction to your yard or garden. You will have the most unique yard on the block. Located away from the noise of the street and surrounded by lush flowers, trees and garden plants, it will become the perfect place to meditate, relax and get away from the rush and hurry of life.

I have used a lot of different cookware over the year including aluminum, corning ware, cast iron, stainless steel, Teflon coated steal, cast iron and enameled cast iron. I ended up throwing all of these pots and pans away when they reached end of life. It too bad I did not discover the benefits of tin lined copper as I could have save a lot of money.

One day I entered a discount store that sold kitchen ware where I saw Mauviel copper pans on display. These were tin lined copper pans and very solidly made. I was impressed with the price as it was not much more than previous cookware purchases that I made. Yet these were beautifully crafted shiny copper pans that were about 1/8 thick with durable cast iron handles. I purchases two saucepans and one saut pan, I couldnt wait to get home and start cooking with them. Since then, I have never purchases any thing but tin lined copper pans as the cooking experience made me a life time customer.

Tin lined cookware is not well known as a non stick product, but it is really the first cookware with a non-stick surface. Tin is an outstanding lining because of its heat conducting properties and food does not stick to it. There is some wrong information about tin lining that it reacts to acidic foods, this is absolutely not true. Many times cooking with tomato sauce without a single issue was enough to prove this to me.

The problem with Teflon coating and anodized aluminum is that it does not last that long and once it not effective, the pan cannot be resurfaced. The pans become worthless after a while. Tin lined products can be resurfaced so the pots and pans will last a long time. Tin lined copper is long lasting and doesnt break up into pieces like Teflon. When cooking with copper you will be extremely impressed with the uniform color of evenly cooked food that tastes better. You will immediately become a better cook when you start using copper.

There are some negatives to using tin lined copper, the tin does where out and will need to be renewed. The average resurfacing cost is less than $100.00 per pan. The tin will melt and form small bubbles if heated above 460 degrees Fahrenheit. However this will not affect the cooking properties so it may not be a big issue. Metal cooking utensils will scratch the surface so need to be careful about the material of the cooking utensils. Also repeated use of harsh cleansers can eventually wear the tin away. Over a longer period of time, the Tin will lose its shine and oxidizes to a gray color.